CAPTAIN'S LOG
Maintenance tips, trip reports, and technical guides for the Albertan Gearhead.
ALL ARTICLES
Fish Finder vs Down Imaging: What Alberta Anglers Need
Traditional sonar, down imaging, or side scan? Understanding the technology will help you find more fish on Alberta's lakes.
Lake Minnewanka Boating: What You Need to Know
Boating in Banff National Park comes with strict rules. Permits, AIS inspections, restrictions—here's everything you need before launching on Minnewanka.
Alberta's Hidden Lakes: 5 Quiet Gems Without Crowds
Tired of fighting for a spot on Sylvan or Pigeon? These lesser-known lakes offer peace, solitude, and excellent fishing.
Winter Boat Storage: Indoor vs Outdoor in Alberta
Heated indoor storage, cold storage, or shrink wrap outdoors? Here's how to choose the right winter storage option for your boat in Alberta's harsh climate.
Prop Hub Failure: The Hidden Danger in Your Rubber Hub
Your prop spins but the boat doesn't move? That's hub spin. Learn how to diagnose a failed rubber hub before it leaves you stranded.
Cavitation Damage: How to Spot It and Prevent It
Those pits and craters eating away at your prop blades? That's cavitation. Learn what causes it, how to identify it early, and the modifications that can prevent it.
Best Jet Boat Rivers in Alberta
From the North Saskatchewan to the Pembina, Alberta offers world-class jet boating. Here are the top rivers, launch points, and what you need to know before you go.
Trailer Bearing Maintenance: The Pre-Launch Check
A seized bearing at the boat launch ruins everyone's day. Learn the 5-minute check that can save you from a roadside breakdown.
Trolling Motor Setup for Alberta Walleye
Bow mount or transom? 55lb or 80lb thrust? Here's how to choose and install the right trolling motor for chasing walleye on Alberta's lakes.
5 Signs Your Prop Needs Repair (Before It Strands You)
Vibration at cruising speed? Reduced top-end? Fuel economy tanking? These are the warning signs that your propeller is compromised and needs professional attention.
Inside the Shop: How We Repair a Damaged Propeller
From initial inspection to final balancing, here's a behind-the-scenes look at the professional propeller repair process. Straightening, welding, repitching, and more.
Why Prop Balancing Matters More Than You Think
An unbalanced prop doesn't just cost you speed—it destroys lower unit bearings and seals. Learn why dynamic balancing is the final step in every professional repair.
How to Ship Your Propeller for Repair
Shipping a damaged prop? Here's exactly how to pack it to prevent further damage, what information to include, and what to expect from the repair turnaround.
Winterization 101: Don't Crack Your Block
The temperature is dropping. If you don't drain your heater core and raw water pump correctly, you're looking at a $8,000 repair bill this spring. Here is the definitive checklist.
Aluminum vs Stainless: Choosing the Right Prop
Hitting rocks in the North Saskatchewan? Stick to aluminum. Running deep water for speed? Stainless is king. We explain pitch, rake, and cup.
QUICK LINKS
ADVERTISING
Want to get your marine business in front of 10,000+ Alberta boaters?
Join the Network